question re: applying side-art

vintagegamer

Well-known member

Donor 2024
Joined
Sep 1, 2007
Messages
21,092
Reaction score
2,602
Location
Bear, Delaware
Is side-art like wallpaper or border? Specifically, is it something where you activate the adhesive on it with water? Or, is it just like one big peel and stick application?

When the day comes for me to do my Tempest side art, I want to make sure I don't screw it up, and am hoping it allows you the ability to move it around on the panel until it dries.
 
There are a lot of posts on applying sideart. It's peel and stick. With the dry method, you can't move it around, but there are ways to do it well. With the wet method, you can move it around, but you can have adhesion issues in addition to possible particleboard swelling.
 
Jedi is right...

I use the dry method, its easy (except that I apply it too low :))

Tons of threads here on this but basically measure about 10 times, then tape it to the cab, peel back the top and the work down.

I use a window squeege to gently help lay it down and eliminate air bubbles.

Go gently at first to ensure you have some ability to lift up if it all goes horribly wrong.
 
Back
Top Bottom