I am putting together a 60 n 1. I just put new 8 way ultimate joysticks on control panel. I had a post where I was having trouble with the sticks not operating. Well I thought I fixed it back then. Becuase, I didn't wire them up right. Finally got done with control panel wiring up the buttons. Went to play games on it to make sure everything was still working properly. But, to my amazement still having problems. They should be wired up right for I did not touch them from fixing them the first time, but controls seem to work on the start up menu. just alittle fast will move up, down, left, and right. Then I go into the service mode, and test it there too. everything shows that it is working properly in the service mode too. But, when I goto play certain games the joystick don't want to work properly. like on gyruss, DK jr, and aothers. I know that certain games take 8 way and 4 way, but before I put on these new stick, I had some 8 way wicos on there and all the games I played worked fine with them sticks. What did I do wrong. Should I just buy new Wico Sticks and put back in there and take out the ultimate sticks. Or is it just me and didn't realize I still had problems and deal with it..
thanks in advance
thanks in advance
