mrbill2084
Well-known member
question about an isolation transformer with pics..
I was finishing off street fighter 1 cabinet, and I had a question about the isolation transformer. I don't think I have run into one like it, so here are some pics. (SF had no monitor in it when I got it).
The cabinet had a monitor power shoved into the ac of the power supply. From my understanding, that would be ok for a monitor that does not need an iso transformer, but since the cabinet has one, might as well connect it right(power to the power supply is fed in before the iso).
My question is there are 2 sets of wires coming out of the back of the transformer. double blue and double yellow. Double blue is going to a 3 pin molex. Its way too short to reach the monitor. double yellow changes to red and blue and goes into the 9 pin molex and ends up at a 2 prong wall like plug middle of cabinet(monitor height). I think the correct plug is double yellow(wall like plug). Any input?
Double blue turns into white and yellow and ends in a short 3 pin molex.
Double yellow changes to red and blue and goes into the wall like plug
I was finishing off street fighter 1 cabinet, and I had a question about the isolation transformer. I don't think I have run into one like it, so here are some pics. (SF had no monitor in it when I got it).
The cabinet had a monitor power shoved into the ac of the power supply. From my understanding, that would be ok for a monitor that does not need an iso transformer, but since the cabinet has one, might as well connect it right(power to the power supply is fed in before the iso).
My question is there are 2 sets of wires coming out of the back of the transformer. double blue and double yellow. Double blue is going to a 3 pin molex. Its way too short to reach the monitor. double yellow changes to red and blue and goes into the 9 pin molex and ends up at a 2 prong wall like plug middle of cabinet(monitor height). I think the correct plug is double yellow(wall like plug). Any input?
Double blue turns into white and yellow and ends in a short 3 pin molex.
Double yellow changes to red and blue and goes into the wall like plug
