Qix control panel overlay question

Silverunicorn

Well-known member

Donor 2011-2012
Joined
Aug 18, 2010
Messages
4,810
Reaction score
416
Location
Quakertown, Pennsylvania
I saw a photo of a Qix for sale in a thread by Bestnguy. Looks like a nice machine, but it looks as though the CPO is different than mine.


Did they make different versions? I know it's not unheard of.

Here's a comparison:

Bestnguy's machine:

5866779358_d46e0c498b.jpg


My machine:

5843517889_103afaf76e.jpg


Both look as thought hey could be original as well. Any ideas?

Chris
 
Last edited:
The Qix I had had the overlay like yours. I know that it's an original. I'm not sure about the other one though. Gameongrafix sells one that looks like the first. it looks like it could be original as well. The flyer shows the overlay like yours as well. - Barry
 
all i know is that the one you have is a lot better looking

the 1/2 player artwork is one of the best parts
 
It is a gameongraphix version. I used one once and couldn't decide if i should cut the Qix in half around the bend or have it all on the front. I wish I would have done it like Bestnguy as it looks better than mine did.
 

Attachments

  • P1090189.JPG
    P1090189.JPG
    85.3 KB · Views: 21
I saw a photo of a Qix for sale in a thread by Bestnguy. Looks like a nice machine, but it looks as though the CPO is different than mine.


Did they make different versions? I know it's not unheard of.

Here's a comparison:
<snip>
Both look as thought hey could be original as well. Any ideas?

Chris

I just looked & mine (which I believe from how beat it is to be original) matches yours Chris.
 
Thanks for the replies.

It personally think it is a good reproduction that is on bestnguy's machine, so I thought maybe Taito made different verstions. I have seen that before, especially with pinball cabinet art.

Thanks for the clarifications.


Chris
 
Back
Top Bottom