Qbert 80-0210-00 power supply deader than disco and no replacement available---any ideas?

DarthLister

Member
Joined
Feb 10, 2018
Messages
47
Reaction score
9
Location
Bardstown, Kentucky
Hey all. The power supply on our stand up qbert went south and a replacement power pro 0210 is apparantly not an option. Normally, I'd just use a newer Suzo Happ, but the terminals are in a completely different configuration and there's an adapter board between the PS and a bunch of molex's heading off to different parts of the boardset. Does anyone know of an adapter to adapt this board to an easier-to-find PS?

Thanks,
Rich
 
from my site:

Happ PowerPro (130W)
Another more industrial variety of the familiar black screw terminal model. These are often found mated to some Arcadeshop power supply conversion kits due to their higher wattage and amperage outputs for some applications.
powerpro_130w_industrial.jpg


unfortunately power supplies are unobtanium again for some reason https://na.suzohapp.com/products/power_supplies/80-0210-00
 
Yep. That's what I've been running into. The distribution board is in that particular pattern(gnd,gnd,+5,+12,-5). Is there a QBert distribution board in the pattern of the more widely-available PS (+12,-5,g,g,+5)?

Rich
 
..so I made some alterations to the adapter in the cabinet to make it work with a standard S-H power supply. Testing tonight...
 

Attachments

  • IMG_20250612_092414273_HDR.jpg
    IMG_20250612_092414273_HDR.jpg
    707.3 KB · Views: 14
Suzo-Happ apparently got sold. that's why they haven't replenished their stock.
Also the whole bs with China, Taiwan, and one china policy plus tariffs aren't helping. Suzo makes them in taiwan, all the chinese switchers are actual junk. If suzo happ stops selling these in America we're going to see a lot of cabinets with burnt out pcbs and burned down cabinets from chinese switchers.
 
Back
Top Bottom