For Sale: Q*bert Main Board w/Multi Q*bert 10 in 1 installed
This is unrelated to the complete four board set that I have for sale here: http://forums.arcade-museum.com/showthread.php?t=251477
I have another Q*bert working main board with Multi-Q*bert 10 in 1 installed that has been repaired, refurbished, tested and ready for installation when you receive it.
Main Board:
· all necessary repairs have been made.
. All socketed ICs have been removed, legs cleaned and re-inserted
· The blue jumpers have been bypassed on the solder side of the board – these tend to oxidize and lose contact causing intermittent graphics problems
· The power-on reset capacitor value was increased to 470uF for stability
· Mike Doyle's 10 in 1 Multi-Q*bert kit installed. Read about it here:
http://revengeofthenerdsv.blogspot.c...nd-finale.html
When you receive it, you will need to finalize the installation by removing the 6502 CPU from your speech board and inserting the satellite board from the multi-Q*bert kit in its place. Then insert the removed 6502 CPU into the 40 pin socket on that satellite board. The installation instructions are also visualized in the above link.
I am asking $450 or best offer shipped for this set.
Thank You,
Bill
This is unrelated to the complete four board set that I have for sale here: http://forums.arcade-museum.com/showthread.php?t=251477
I have another Q*bert working main board with Multi-Q*bert 10 in 1 installed that has been repaired, refurbished, tested and ready for installation when you receive it.
Main Board:
· all necessary repairs have been made.
. All socketed ICs have been removed, legs cleaned and re-inserted
· The blue jumpers have been bypassed on the solder side of the board – these tend to oxidize and lose contact causing intermittent graphics problems
· The power-on reset capacitor value was increased to 470uF for stability
· Mike Doyle's 10 in 1 Multi-Q*bert kit installed. Read about it here:
http://revengeofthenerdsv.blogspot.c...nd-finale.html
When you receive it, you will need to finalize the installation by removing the 6502 CPU from your speech board and inserting the satellite board from the multi-Q*bert kit in its place. Then insert the removed 6502 CPU into the 40 pin socket on that satellite board. The installation instructions are also visualized in the above link.
I am asking $450 or best offer shipped for this set.
Thank You,
Bill
Last edited:
