Q about wiring in Captain Kid gun game

aeneas

New member
Joined
Jul 14, 2009
Messages
317
Reaction score
0
Location
Antwerp, Belgium
Hi all,

I'm trying to get a Midway Captain Kid gungame working.

The 3 wires going to the moving pirate head in the bottom are totally melted, the outer grey plastic is burnt and the wiring itself too.
Near the coil I see about half an inch of red and black color (don't know what the other color is), but at the other side where the wires go on the pcb everything is burnt crisp.. no way to identify what color wire goes where :( (and they don't have continuity anymore so I cant measure that).

If anyone has this game, can you please have a look where the 3 colors wire go ?

I pm'd a few people here that posted about the game before but didn't get a reply, so maybe others also have it and can reply sooner..

thanks,

Aeneas.
http://www.flippers.be
 
I talked with Gorfchampion today, he said he will get back to you. He has been working outside on his landscape. He just had to wait for 90+ weather to do it.
 
Hi all,

I'm trying to get a Midway Captain Kid gungame working.

The 3 wires going to the moving pirate head in the bottom are totally melted, the outer grey plastic is burnt and the wiring itself too.
Near the coil I see about half an inch of red and black color (don't know what the other color is), but at the other side where the wires go on the pcb everything is burnt crisp.. no way to identify what color wire goes where :( (and they don't have continuity anymore so I cant measure that).

If anyone has this game, can you please have a look where the 3 colors wire go ?

I pm'd a few people here that posted about the game before but didn't get a reply, so maybe others also have it and can reply sooner..

thanks,

Aeneas.
http://www.flippers.be


I haven't had time to get down there yet to look at it. I'll try to get you an answer by Sunday the 18th for sure....
 
Back
Top Bottom