Putting ramps in dishwasher?

Spbeyond

New member
Joined
Mar 29, 2005
Messages
945
Reaction score
2
Location
Utah
Hey guys, someone told me to put my plastic ramps in the dishwasher with a no heat dry and they would be very clean. Is it okay to leave the decals on bottom? White water has a bunch of decals. Thanks guys!
 
I did this with my Taxi ramps and it seemed fine, decals and all. But I don't think it got any cleaner than just a really thorough cleaning by hand.
 
This ramp went through the dish washer. My dish washer has a 5 min quick rinse cycle. I run them through twice. First time I do use a very small amount of soap. 2nd time, no soap, just water. I've done this a few times w/ different ramps. I personally have had no problems w/ the decals. But caution is always advised. Then I dry them w/ a paper towel and proceed to wax the ramps w/ Meguires Caranuba wax. They come out great.
 

Attachments

  • ramp before.jpg
    ramp before.jpg
    60.8 KB · Views: 44
  • ramp after.jpg
    ramp after.jpg
    67.9 KB · Views: 45
I also put a lot of ramps in the dishwasher (short/cold cycle), works without problems.
Don't cover microswitches but usually I blow them dry with some air.
Decals are no problem (unless they're already damaged/lose).
 
Back
Top Bottom