Putting a Xenon MPU in a Flash Gordon. Jumper changes?

MC35

Member

Donor 2011
Joined
Sep 14, 2011
Messages
549
Reaction score
4
Location
Friendship, Wisconsin
Putting a Xenon MPU in a Flash Gordon. Jumper changes?

I'm trying to put a Xenon MPU ( AS-2962-21) into a Flash Gordon (AS-2518-35). Besides changing the ROM's. I also mirrored the jumpers from the -35 on to the -21.
Is this going to work, or do I have other things to change to make this work? It doesn't help that the old MPU had acid damage and has caused connector problems, so until I get that problem figured out, I can't verify if the -21 is going to work in Flash Gordon.
Any guidance is appreciated.
Thanks,
MC
 
Back
Top Bottom