Punchmania 2 Arcade machine repair issue (aka fighting mania) - Motor Replacement

cheezemasta

New member
Joined
May 24, 2012
Messages
3
Reaction score
0
Location
Oregon
Punchmania 2 Arcade machine repair issue (aka fighting mania) - Motor Replacement

Hi, I have a punchmania 2 machine and one of the motors has gone out and I can't find one anywhere! I've even contacted the usa branch of the company where they made these motors and they don't make them anymore.

Basically I need a motor that would replace the 24v geared motor that is on the machine.

Here is a link to some pics I took of the motor

http://s1058.photobucket.com/albums/t418/cheezemasta/

it is a tsukasa 24v geared motor. NO: 00228 TG-06E-BE-180-C756


For anyone not familiar with the game the motor moved the punching pads back and forth so they can be hit at specific times. The motor has unique grooves on the end piece (not sure what to call it) and I sure could use any help anyone is willing to give me on this one!
 
It almost looks like the vibrator/feedback motor in my Let's Go Jungle guns in a way, but those were 110 IIRC. I was going through them like crazy (over 6 total in a year) until they redesigned the gearing and set-up of it and going on for 4 years strong now. I would post some pics but I tossed the old motors years ago.
See if they have one with a different voltage and use a voltage step down converter of some type, or one that might be a little faster or slower.
What exactly wrong with it? Not working completely at all(burned up?). Bad main drive gear(looks fine).
 
it's not working completely. It will move the pad slightly forward and slightly back but the game needs to send the pads out fast because it's a timing thing. its not that the pad has to be all the way out at just the right time either. Its just that the pad needs to be all the way out or so before the led on it flashes. Every pad has an led so that the player knows exactly when to hit it.
 
is it possible to buy a new motor that is of the same equivalent and take that end piece that is coming out of it and put it on a new one?

Say like buy a new tsukasa motor that is basically the same but has a different tooth coming out of it and put the old punchmania one on there?
 
Back
Top Bottom