Punch-Out Harness Edge Connector question

Yes. Punch-Out uses the same 56-pin card edge connector that a JAMMA board uses, but it doesn't have a JAMMA pinout.
 
Yes, it will work. Just make sure you do a good job labeling your wiring to illustrate what side is the "parts side" and what side is the "solder side," or install some keys to prevent plugging in the harness incorrectly.
 
Yes, it will work. Just make sure you do a good job labeling your wiring to illustrate what side is the "parts side" and what side is the "solder side," or install some keys to prevent plugging in the harness incorrectly.

Definitely. Thanks!
 
Back
Top Bottom