ps wiring help for arkanoid

partygt

Active member
Joined
Apr 5, 2009
Messages
4,122
Reaction score
19
Location
California
i got a barn find arkanoid with no power supply in it trying to figure out the wires so i dont fry somthing. i can tell the white and one black goes to ac but the rest? yellow is +12? other 2 black any ground? orange? thanks!
 

Attachments

  • IMG_1715.jpg
    IMG_1715.jpg
    527.2 KB · Views: 17
  • IMG_1714.jpg
    IMG_1714.jpg
    525.6 KB · Views: 16
pics......
 

Attachments

  • IMG_1709.jpg
    IMG_1709.jpg
    550.3 KB · Views: 16
  • IMG_1708.jpg
    IMG_1708.jpg
    539.4 KB · Views: 10
First is it a green romstar or bootleg board? Or a white Taito board.?
 
whether it's bootleg or legit makes a huge difference. the legit boards use a flat molex plug for power. I can take pictures of the one at work permitting that's what you have, you can follow the wires back.

the original harness with it actually used the more typical red/black/yellow colors, so yours might be bootleg.

I had one of those too but I junked the bootleg hardware from the cab and put the proper Taito stuff in, just because the sound pitch was wrong on the boot.
 
here is a picture of it
 

Attachments

  • IMG_1719.jpg
    IMG_1719.jpg
    556.9 KB · Views: 25
Last edited:
that does not look like it matches up to what i have? see pic
 

Attachments

  • IMG_1722.jpg
    IMG_1722.jpg
    534 KB · Views: 13
Back
Top Bottom