- Joined
- Jan 24, 2013
- Messages
- 1,436
- Reaction score
- 230
Projects: Millionaire $300 (sold) / Xs & Os $500 - East TN
I'm bringing 2 games to the auction this Saturday in Sevierville TN and thought I'd post pics here.
Xs & Os: $475 (sold at auction)
I went through this game completely. Everything works. Cleaned and adjusted flippers and pop bumpers. Rebuilt Driver board with ground mods and fixed all circuits. Original -35 Bally MPU works great, no corrosion. I clearcoated the backglass. The only thing I have to do left is to clean and rubber ring it, but I just don't have the time anymore.
--------
Millionaire: $300 (sold)
I didn't do much to this one. It blows F4 upon startup. The MPU had some corrosion damage, so I took it out and tried to clean it, now it won't boot up at all. Before I took the mpu out the game worked. The displays were missing segments and some were dim, I thought it was the corroded display cable. I replaced it but can't see if they've been fixed or not. The game was booting and going into a game, however it would never kick out the pinballs. Flippers, spinner, pop bumpers all worked before the mpu went dead. There is a crack in the display panel on the left dollar sign area. The game is complete and it's in decent shape.
---------
I'm going to auction both of these if I don't sell them first. I'll be at the auction on Friday night and then saturday about 9ish through whenever it's done.
-Pat
I'm bringing 2 games to the auction this Saturday in Sevierville TN and thought I'd post pics here.
Xs & Os: $475 (sold at auction)
I went through this game completely. Everything works. Cleaned and adjusted flippers and pop bumpers. Rebuilt Driver board with ground mods and fixed all circuits. Original -35 Bally MPU works great, no corrosion. I clearcoated the backglass. The only thing I have to do left is to clean and rubber ring it, but I just don't have the time anymore.
--------
Millionaire: $300 (sold)
I didn't do much to this one. It blows F4 upon startup. The MPU had some corrosion damage, so I took it out and tried to clean it, now it won't boot up at all. Before I took the mpu out the game worked. The displays were missing segments and some were dim, I thought it was the corroded display cable. I replaced it but can't see if they've been fixed or not. The game was booting and going into a game, however it would never kick out the pinballs. Flippers, spinner, pop bumpers all worked before the mpu went dead. There is a crack in the display panel on the left dollar sign area. The game is complete and it's in decent shape.
---------
I'm going to auction both of these if I don't sell them first. I'll be at the auction on Friday night and then saturday about 9ish through whenever it's done.
-Pat
Attachments
Last edited:
