You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Museum of the Game® & International Arcade Museum® Forums
Hi,
Over the past couple weeks, I built a driver board for the lamps and LEDs and a Raspberry Pi 3 image to control it via GPIO for @shertz's Professor Pacman machine. For @shertz machine, we have ensured that the mod is 100% reversible by constructing an alternate wiring harness to plug the control panel and audio into.
While I was doing this, the strangest thing happened. Out of the blue, someone contacted @shertz, who also had a Professor Pacman, and saw a similar project we did back in 2005. They wanted to do the same thing for preservation and reliability at shows.
This got me thinking that maybe there are other Professor Pacman owners who would like to do this. This is such a rare game that I really thought this would be a one-off.
I still have 7 boards left. When they're gone, there's zero chance I'll be revisiting this project again. I'd be happy to share the Raspberry Pi image and provide information needed to get things working.