Problems with Blackout Pin?

arcaderookie

Member
Joined
Apr 12, 2010
Messages
521
Reaction score
1
Location
Tennessee
I just obtained a used and in fair condition Blackout Pinball. Asked guy what was wrong with it. He told me that the flippers did not work and the ball would not return. Asked if the display came on and he said yes.. So, I bought it thinking it might be a fues or a siliniond problem. Well, I got it home and found out that it didn't do anything except for the lights to come on..could not do self test, did not here bumper or silinoids activate, display did not come on. only thing that did work was the lights. no sound either. Need alittle help figuring out problems..

thanks
 
If all you get is GI lighting, then I would remove all the boards and check for cracked solder joints first.
 
Blackout

The pinrepair guide above is a great place to start. I was able to get my Blackout up and running in no time using this guide. It's a super fun pinball too! Good luck with your repair.
 
Thanks for all the replies

I want to thank you on all the replies I will like into all of it.

Thanks again for the info
 
Back
Top Bottom