Problems with a Sanyo 20 EZ monitor in Crystal Castles

Gambeno

Member
Joined
Oct 2, 2010
Messages
439
Reaction score
1
Location
Rocky Mount, Virginia
Problems with a Sanyo 20 EZ monitor in Crystal Castles

I got the monitored hookup up but all I'm getting is light from the screen. No picture. I can adjust everything (Hor, Ver, Color, Contrast, ect) and the colors change on the screen but I still have no picture, just a bright screen. Picture 1 below shows my screen. The 2nd picture is my inverter board, just wanted to make sure it was hookup up correctly. Only change the invert for correct colors on the Crystal Castles. also the 4th or last picture is cables I do not have hooked up and was wondering if they need to be? I believe the red and white is for the sound but not sure what the brown and white is. any help would be greatly appreciated, I don't know to much about monitors besides what I learn along the way.
Thanks,
Kane
 

Attachments

  • IMAG0507.jpg
    IMAG0507.jpg
    113.5 KB · Views: 27
  • IMAG0508.jpg
    IMAG0508.jpg
    97.5 KB · Views: 36
  • IMAG0509.jpg
    IMAG0509.jpg
    88.6 KB · Views: 25
  • IMAG0511.jpg
    IMAG0511.jpg
    92 KB · Views: 24
Could you elaborate? I'm kind of a novice but I hook the colors up accordingly so I thought.
Sanyo Crystal Castles
6.Sync(blue) vsync & hsync
5. Gnd (green) video return
4. Gnd (yellow) same vid rtn
3. Blue (orange) Blue
2. Red (Red) Red
1. Green (Brown) Green

Any help would be appreciated.
Thanks,
Kane
 
I got the monitored hookup up but all I'm getting is light from the screen. No picture. I can adjust everything (Hor, Ver, Color, Contrast, ect) and the colors change on the screen but I still have no picture, just a bright screen. Picture 1 below shows my screen. The 2nd picture is my inverter board, just wanted to make sure it was hookup up correctly. Only change the invert for correct colors on the Crystal Castles. also the 4th or last picture is cables I do not have hooked up and was wondering if they need to be? I believe the red and white is for the sound but not sure what the brown and white is. any help would be greatly appreciated, I don't know to much about monitors besides what I learn along the way.
Thanks,
Kane

Did Crystal Castles come with that monitor?

The 20EZ Monitors I've seen have been 100V, hooking them up to 120V is a BAD thing. :eek:
 
No, it originally had a G07 in it, but a fellow Klover is fixing it for me. I was hoping the Sanyo would work but I believe something is wrong with it. I have the Sanyo hooked up to a Punchout PSU to get the correct 100v. Just can't figure out what could be wrong with the monitor.
 
do you have power going to the inverter?

If you plug the input directly into the monitor do you get an inverted picture?
 
do you have power going to the inverter?

If you plug the input directly into the monitor do you get an inverted picture?

I tried bypassing the inverter but still the same problem, just a bright screen no picture. I can adjust the colors to make the screen Blue, Red, Green but still no picture. :(
 
Back
Top Bottom