Problem-see photo

THEDJ

New member
Joined
Oct 20, 2008
Messages
520
Reaction score
4
Location
SOUTHPORT, Indiana
Having a video problem, I know the monitor is good.



this is on a 48 in 1 pcb.
 

Attachments

  • DSCI0051.jpg
    DSCI0051.jpg
    32.7 KB · Views: 83
Video problem

If you are running the standard wires off of the jamma harness and it is doing this, try using the VGA port to an old computer monitor and see if you get the same results. There is a dip that you will have to change to do that also.
 
Wow

That is a weird pic. I had one that did something similar to this but not near as bad. It is obviously something on the board because the text is not smeared near as bad. What is you 5v running at on the board?

DSCI0051.jpg
 
board at 5 volts.
vga port on pcb board does the same thing when connected to a computer screen.


i had to just turn down the color adjustments on the neck board red/green.

they are down so low, that it can't play dig dug, cause the lower ground level now looks black.


is the any other adjustments on the tube neck?

thanks

ck
 
Back
Top Bottom