prob after capkit/neckboard replace

rony2211

New member
Joined
Dec 30, 2009
Messages
443
Reaction score
0
Location
weaverville, North Carolina
did a cap kit and neck board replacement on a w-g 7000 series last night , while i was tired
now the image is backwards like it should go in a game that uses a mirror to project the image,i know im not saying this right, if anyone knows what im talking about please help Ron
 
Hi Ron;
Where the yoke plugs into the board, behind the flyback, there's 4 wires. two next to each other will be red and blue I believe the other two will be yellow and green. If you switch the red and blue around (you can pull the plug out, and reverse it if it's been broken in half), you'll switch the monitor around horizontally (from side to side if it's a sideways mount monitor). If you reverse the green and yellow wires, you'll flip the image vertically (if it's a sideways mounted monitor). You may have plugged them in backwards when you put the wires back in, if you took them out.

If all four wires are still connected in order, don't try to plug it in where all four are reversed, it'll blow up all kinds of stuff.

It'll be like Red/Blue/Green/Yellow

You can switch it to Red/Blue/Yellow/Green

or Blue/Red/Green/Yellow

Or Blue Red/Yellow/Green

But no other way.
 
thanks , ill try it after work tomarrow, ps the marvel vs capcom machine i got from you is my best money maker, i evan got a marvel v capcom 2 put together last week,and the first one beat it lol Ron
 
Back
Top Bottom