Printing vectorlib graphics

gobsgraham

Member
Joined
Mar 26, 2009
Messages
649
Reaction score
17
Location
AB, Canada
Hi Everyone,

I am wokring on a Qix restoration and rather than buying used ugly scratched glass I wanted to print the Qix monitor bezel from the vectorlib webpage. The problem is the default size of the artwork is coming out at around 95"x85". Does anyone know the actual dimensions that I should be printing this too?

I suppose that I could measure the opening and come up with something close enough but if anyone knows for sure it would sure help alot.

Thanks
 
I own a Qix. I just pulled the bezel glass and measured it for you. The glass is 22-1/2" wide by 21-3/4" high. You'll need to shave about 1/8" off of each of those dimensions for the graphic itself, as the silk screened graphics do not go all the way to the edges of the glass; there is about 1/16" of glass left on all sides.
 
Thank you very much. I appreciate you doing that for me. Now off to learn to use illustrator.
 
Back
Top Bottom