Museum of the Game® & International Arcade Museum® Forums

I Picked up a Primal Rage a few days ago with a blown PSU. I got to looking at diagrams in the manual to make sure I wire the PSU right.
Well it seems like the Diagrams are not the same as the actual Wiring. Unless I'm missing something or just a dumb@ss.
I think this is what I have at the pin-out: 4 Brown Ground, 3 Red +5, 2 R&W First and second player start?, 2 Yellow +12v.
Its nothing like it says in the manual.... I'm missing the -5 in the diagram it say should be there, and it seems like it was never there.... all the zip ties & build Tags are tight on the harness and it all looks stock with no hack jobs.
the guy I got it from had the wiring wrote down in the back, but I think that is wrong as well...
I got all my wiring bunched up in the back as to the way I think it hooks to the psu.
Red +5, Yellow +12, Brown Gnd,
If anyone has more info on this it would be greatly appreciated! I don't want to blow a new psu up right out of the gate on this thing.
this is the Manual in reference

IMG_20251008_173652.jpgIMG_20251008_173647.jpg

IMG_20251008_173610.jpg1759966381627.png
Back
Top Bottom