PRICE CHECK: Root Beer Tapper pcb set/sound issues

JC Arcade

Well-known member
Joined
Oct 30, 2006
Messages
2,598
Reaction score
58
Location
New Jersey
Rating - 100%
55   0   0
PRICE CHECK: Root Beer Tapper pcb set/sound issues

Trying to figure out what to ask for this. Was fully working, then swapped a different SSIO board in. Sound has random issues like missing, or low volume, or just doesn't sound right. As I was putting the RB Tapper ROMS in though, I did notice one of the sockets was loose. Could be the culprit. Who knows.
 
tapper uses a sound board with panning so basically two channels I believe. Is the new board you swapped in a panning sound board? If not that may be why you have issues. If it has the correct sound board but with issues I would still say it should be in the $150 shipped range. If fully working I'd say $200 possibly higher.
 
IIRC the spanning boards were only used in games with 4 speaker stereo systems like EDOT and Spy Hunter cockpits.
 
tapper uses a sound board with panning so basically two channels I believe. Is the new board you swapped in a panning sound board? If not that may be why you have issues. If it has the correct sound board but with issues I would still say it should be in the $150 shipped range. If fully working I'd say $200 possibly higher.

Yeah, it's the correct board. I swapped boards between the RB Tapper and a Bud Tapper set.

.
 
Back
Top Bottom