Price check on Major Havoc

ToddK

Well-known member

Donor 2023-2024
Joined
Sep 12, 2005
Messages
1,578
Reaction score
2,238
Location
Oviedo, Florida
Rating - 100%
52   0   1
I have a Major Havoc factory tempest conversion, Major Havoc marquee and major havoc control panel, has the Tempest side art, complete with everything including WG6100, AR2, full harness etc.... , it is missing the PCB, was going to sell it as it sits... came out of a Showbiz pizza, still has metal property tag on back . not sure what to ask for this missing the PCB as I know those can be pricey.........
 
Minus the PCB should be roughly on par with a tempest missing the PCB, plus a couple hundred for the MH artwork and adapter PCB. So in the low 1K+ range. PCB is probably a 1Kish acquisition on its own.

FWIW I recently bought a complete but dead Space Duel Havoc, and it was less than 2K also.
 
I have a Major Havoc factory tempest conversion, Major Havoc marquee and major havoc control panel, has the Tempest side art, complete with everything including WG6100, AR2, full harness etc.... , it is missing the PCB, was going to sell it as it sits... came out of a Showbiz pizza, still has metal property tag on back . not sure what to ask for this missing the PCB as I know those can be pricey.........
Which control panel? I think there were two. One with spinner and one with roller.

The factory conversion I had was roller.
 
The archived average price for a nice and complete / working Tempest-to-Major_Havoc conversion is about $2400-3000.
Without the logic PCB, then subtract about $1000-1500 from that price and you'll be in the running to sell.
A good deal, perhaps, for someone that has an extra MH PCB just gathering dust somewhere. Ain't that all of us? :)

8682d147a01463b5a223317461ca5b14.gif
 
This one has the spinner. Not the roller. …. Thanks for the heads up. I was thinking 1,200-1,500.00. But wanted some input… I appreciate it
 
Back
Top Bottom