Price Check Exidy shooter almost restored

gatordad

Well-known member
Joined
Aug 29, 2007
Messages
1,853
Reaction score
79
Location
Illinois
Rating - 100%
39   0   0
A multiexidy is one of my wants.

I have been talking with a guy about a Exidy Cheyenne in a crossbow cab.
Its not completely restored but close, still needs side vinyl, side art, and t-molding. Does not have a multikit in it.

Working and looks nice so far
He wants 900 I offered 600

Price Check?
 
900 is about right in that condition... all though i have seen some KLOVers sell them cheaper on here to other KLOVers... it depends on how bad you want it for that price i guess!!

i bought my crossbow acouple of years ago for 500 not working!!your deffinitly gonna pay 450-500 for a multi (at least thats what they have been selling for on HERE) good luck!
 
if i were you i would WAIT and hold off on this one.

the CROSSBOW cabs are huge, not easy to move, and usually banged up in lower front corners.

i would wait for a og dedicated SMALLER cheyenne cab. lighter and better looking than the biggee cabs.

this crossbow for sale doesnt sound restored at all??? no black vinyl, no sideart, no tmolding? what work has been done?

be patient and wait :)

A multiexidy is one of my wants.

I have been talking with a guy about a Exidy Cheyenne in a crossbow cab.
Its not completely restored but close, still needs side vinyl, side art, and t-molding. Does not have a multikit in it.

Working and looks nice so far
He wants 900 I offered 600

Price Check?
 
if i were you i would WAIT and hold off on this one.

the CROSSBOW cabs are huge, not easy to move, and usually banged up in lower front corners.

i would wait for a og dedicated SMALLER cheyenne cab. lighter and better looking than the biggee cabs.

this crossbow for sale doesnt sound restored at all??? no black vinyl, no sideart, no tmolding? what work has been done?

be patient and wait :)

+1 on this!!
 
So you know all the facts on what has been done. So I think 900 is a good price as you can see what has been done, and the condition. A few steps away from a mint crossbow cabinet

Front wood board has been replaced, the inside wood boards(monitor) have been replaced, upper board has been replaced. No damage to cabinet at all, front corners and cab mint

New monitor shroud
New interior sides new.
New vinyl on front, inside of front sides, inside on both sides of control panel, top, back top, and backside has new vinyl.
Has rare hard to find wooded crossbow stock
New control panel wood deck and control panel overlay from gameongrafix
New cap kit installed on monitor
Sides are primed black awaiting new vinyl or option to just paint it.

Dont have vinyl on sides yet has I ran out of vinyl
Dont have sideart yet
Dont have t-moulding yet either up in the air about color

here are a couple of pictures so you can see
 

Attachments

  • 100_1861 (800x600).jpg
    100_1861 (800x600).jpg
    40.3 KB · Views: 47
  • 100_1870 (600x800).jpg
    100_1870 (600x800).jpg
    47.9 KB · Views: 47
  • 100_1863 (800x600).jpg
    100_1863 (800x600).jpg
    43.4 KB · Views: 48
  • 100_1868 (600x800).jpg
    100_1868 (600x800).jpg
    61.3 KB · Views: 64
  • 100_2083 (600x800).jpg
    100_2083 (600x800).jpg
    65.2 KB · Views: 63
Last edited:
$900 is a steal for all that work. But the CPO is not phoenix arcade, it's from gameongrafix and the artwork is way off.
 
Thanks, I made the correction. I know on the artwork, alot of green in it. I was trying to find Ivans artwork, but no luck on contacting him. If I go with gameongrafix sideart, I might go with the bright green t-moulding like on galaga I think that would look cool. Not sure yet, so thats why no sideart.
 
Last edited:
So you know all the facts on what has been done. So I think 900 is a good price as you can see what has been done, and the condition. A few steps away from a mint crossbow cabinet

Front wood board has been replaced, the inside wood boards(monitor) have been replaced, upper board has been replaced. No damage to cabinet at all, front corners and cab mint

New monitor shroud
New interior sides new.
New vinyl on front, inside of front sides, inside on both sides of control panel, top, back top, and backside has new vinyl.
Has rare hard to find wooded crossbow stock
New control panel wood deck and control panel overlay from gameongrafix
New cap kit installed on monitor
Sides are primed black awaiting new vinyl or option to just paint it.

Dont have vinyl on sides yet has I ran out of vinyl
Dont have sideart yet
Dont have t-moulding yet either up in the air about color

here are a couple of pictures so you can see
Hi
I knew you were on here ;)
 
wow, that is a nice game right there knight rider....

thats too bad you gotta sell it :(

Thanks, I made the correction. I know on the artwork, alot of green in it. I was trying to find Ivans artwork, but no luck on contacting him. If I go with gameongrafix sideart, I might go with the bright green t-moulding like on galaga I think that would look cool. Not sure yet, so thats why no sideart.
 
I just paid $900 for one in much less restored shape. If I would have known this was for sale, from this seller and at this price, I would have bought it in a second.
Damn!!!
 
I saw this one in person before John put some more work into it. I almost bought it from him.

It is a very nice machine, whomever gets it will be getting a nice one.

Bump for a good seller and a nice machine.
 
Back
Top Bottom