Pre Order Pheonix Arcade Control Panel & CPO!!

Sorry, I have been on the fence about pre ordering, and didnt do any research.
I have a Stargate destined to be a multi Williams, using the Jrok board.

Two questions.

1) Will this panel work on a stargate cab even though the origional was wood?

2) Is this layout the best for the jrok board?

Ok I lied, have a third question...
3) Are all the images on the cpo from games on the jrok board.
Thanks
 
MundoMan4 said:
Sorry, I have been on the fence about pre ordering, and didnt do any research.
I have a Stargate destined to be a multi Williams, using the Jrok board.

Two questions.

1) Will this panel work on a stargate cab even though the origional was wood?

2) Is this layout the best for the jrok board?

Ok I lied, have a third question...
3) Are all the images on the cpo from games on the jrok board.
Thanks
Click to expand...

1) Yes, it will fit on a Stargate, Robotron, and Joust Cabinet.

2) That's based on anyones opinion ...... Maybe someone else can answer that.

3) Pic is on my original post. Just take a "look-see"

Hope that helps
 
I'll be number 25. Put me down for one cp and one overlay. I miss my old MW. I should have never sold it. I have a JROK board just waiting for this.
 
Whoooooo!!!!! We are there people!!!!

PayPal = [email protected]

*** I request that you pay as a "gift" so that I do not pay the fees, but if you don't I understand. But, I'm a good guy and I don't want to lose my reputation over this. I just want my CP's too! ***

$60 deposit

I will PM everyone ....... Just to make sure everyone is notified.

I will also update the post w/"PAID" so everyone knows what's going on.

Thanx
Jim

~~~ I can still take orders/deposits ..... I'm getting 50 of them. ~~~;)
 
Jim, you getting ready to go to production!! You should have hard numbers now, Price on Control panel $60??

Looks like you are askiing for 50% deposit. So is the deposit for each panel $30?


Thanks, Dan
 
Last edited:
djw90 said:
Jim, you getting ready to go to production!! You should have hard numbers now, Price on Control panel $60??

Looks like you are askiing for 50% deposit. So is the deposit for each panel $30?


Thanks, Dan
Click to expand...

Sorry. $30 for CP's only ..... $60 for CP's & CPO's.

Also ..... CP is getting sent to the manufacturer. When CP is actually getting produced I'll be asking for the remainder.
 
Last edited:
I wanted to get in on the preorder, but could someone give there opinion on my questions. I've seen this discussed before so know it should be an easy answer.

I have a Stargate destined to be a multi Williams, using the Jrok board.

Three questions.

1) Had this answered. It WILL work on a stargate cab even though the origional was wood?

2) Is this layout the best for the jrok board? I believe it is, but want to be sure there arn't issues like on the 19-in-1 where some games are unplayable.

3) Are all the images on the cpo from games on the jrok board. I looked at the image, but can't make out what some images are, since this was origional made before the JROK board, wanted to know if jrok had all the games depicted.

JimFly said:
1)
2) That's based on anyones opinion ...... Maybe someone else can answer that.

3) Pic is on my original post. Just take a "look-see"

Hope that helps
Click to expand...
 
MundoMan4 said:
I wanted to get in on the preorder, but could someone give there opinion on my questions. I've seen this discussed before so know it should be an easy answer.

I have a Stargate destined to be a multi Williams, using the Jrok board.

Three questions.

1) Had this answered. It WILL work on a stargate cab even though the origional was wood?

2) Is this layout the best for the jrok board? I believe it is, but want to be sure there arn't issues like on the 19-in-1 where some games are unplayable.

3) Are all the images on the cpo from games on the jrok board. I looked at the image, but can't make out what some images are, since this was origional made before the JROK board, wanted to know if jrok had all the games depicted.
Click to expand...

The metal panel will fit the stargate.

The joystick and hole position are what you want for a jrok board.

cpo art was made for clays multi. it works with the jrok, but all the games are not on it.
 
So far 9 payments have been made. Anyone know 7146aaron personally or have the ability to reach him? His mailbox is full.

I'll update the post tomorrow it's been a very long day ......
 
JimFly, is it too late to get in on the pre-order? Or can I just go ahead and commit to buy?

Either way, I would like to get two (2) metal control panels, and one (1) CP overlay.

Thanks,
Art
 
I had the money for the deposit after all the bills today. So 30.00 deposit made Jim but I forgot to put any details in the gift payment I sent err. I'll send a pm to your klov box to confirm who paid ya!
 
List has been updated w/deposits and added Artisan2084 to the list.......12 deposits have been made ....... Waiting for 15 more.
 
Change of plans for me. Rather than put a MW together, I'm going to go the easy route and buy DJDNS's. I've already paid a $60 deposit for the cp and cpo- if anyone wants to take my spot, I'll let them have it for only $50, if they pp it to me as a gift (you'll still have to pay the $60 balance on it once completed). Pm me if interested and I'll let Jim know once I receive your payment.

Chris
 
You must log in or register to reply here.

Similar threads

SOLD - GAME Popeye Arcade
Replies
1
Views
301
Rugarte
FS Game: Nintendo Popeye arcade
Replies
2
Views
439
videodan
videodan
flynn54321
FS Game: Krull Arcade Game
Replies
3
Views
561
coinopper
coinopper
flynn54321
FS Game: Lots Of Arcade Games
Replies
13
Views
909
fatherpain
fatherpain
FS Game: Crazy climber arcade game
Replies
1
Views
297
chips4sle
Back
Top Bottom