Robochronic
New member
Put me down for 1 cp with CPO.
Pre Order Pheonix Arcade Control Panel & CPO!!
- Thread starter JimFly
- Start date
Im up for one and maybe a second, but really need them in the next month or so... no idea at all on time frame???
OP
OP
JimFly
Member
I'll be able to give a time frame in the next couple of days.
louisurfer
New member
I'll be in for one control panel and the overlay.
- Joined
- Aug 3, 2009
- Messages
- 5,152
- Reaction score
- 534
CP only
I already have a MW CPO from Darin for this project.
Can you make the joystick bolts for this project long enough?
I want to be able to bolt a piece of wood underneath so that the spacing is correct as if I used an original wood control panel. I also don't want to use button spacers. I think it would be a nice way to get it similar to the original control panels.
Here's Mine ready for a new CP. It was too much work to move the joysticks. I am already running the JROK board in a JAMMA converted (not me) Robotron.
I already have a MW CPO from Darin for this project.
Can you make the joystick bolts for this project long enough?
I want to be able to bolt a piece of wood underneath so that the spacing is correct as if I used an original wood control panel. I also don't want to use button spacers. I think it would be a nice way to get it similar to the original control panels.
Here's Mine ready for a new CP. It was too much work to move the joysticks. I am already running the JROK board in a JAMMA converted (not me) Robotron.
Attachments
Last edited:
OP
OP
JimFly
Member
Got back some info for the time frame. It would take 2-3 weeks for production and about another week to get to me. So lets assume 4 weeks before shipping them out. I hope this helps with all you "sitting on the fence"
I already have a MW CPO from Darin for this project.
Can you make the joystick bolts for this project long enough?
I want to be able to bolt a piece of wood underneath so that the spacing is correct as if I used an original wood control panel. I also don't want to use button spacers. I think it would be a nice way to get it similar to the original control panels.
Here's Mine ready for a new CP. It was too much work to move the joysticks. I am already running the JROK board in a JAMMA converted (not me) Robotron.
Not sure that would work?? The new panel would have to be bigger to fit the wood panel??
Oryk Zinyo
Well-known member
I am willing to buy one full set.
[
Time frame looks great - so add me in for the second for sure. Didn't see me listed on the 'committed to buy' list for the first one but add me again for the second.
OP
OP
JimFly
Member
List has been updated! You guys know anyone else interested? It's getting close but it seems to have died down in interest. If I can get a few more this week I will probably start taking deposits this weekend and getting the template to the manufacturer.
Yep, count me in.
OP
OP
JimFly
Member
Almost there ..... 25 is the minimum to get this done ...... The more the merrier!! I'm waiting for some clarification from some people. I'll give payment info tomorrow or Friday at the latest.
-Jim
-Jim
