FS Parts: Pre-order Black Nintendo Offset Molding

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
Rating - 100%
58   0   0
I "believe" we have enough interest to move forward with the "offset black" molding. However, in order to move fully move forward I need to sell about 15-20 machines worth.

But before I take your order please be sure that your cabinet is indeed "offset". For example, I know of an R-TYPE that is plywood and has a centered slot so this molding would not work. So, measure... remeasure... and if your still unsure... Send me an e-mail via my contact form with your address (US addresses only please) and I'll be more than happy to send you a few inches of "offset white" molding to test on your machine.

Offset_Molding-1.jpg


Pre-order here.

http://www.chompingquarters.com/store.php/products/true-offset-nintendo-t-molding-black-486-487

If I don't get enough orders between now and July 19th, 2012 I will refund everyone's money and re-entertain the project in a few months.




UPDATE: Project on hold... Please contact me for a sample of "white" offset.
 
Last edited:
Friday morning bump...

Even though I've been getting a crap load of inquiries for the last several months... I've had only sold less than 5 machines worth... I'm ordering more offset in the next couple of weeks but at this rate black molding is in jeopardy of not happening again (if ever). I'm more than willing to send out samples of the offset white to anyone that is "unsure" if it's the correct molding for their machine.

I have other projects that are next in line so speak up now if you seriously need offset black.
 
I don't need any, but it may be a thread visability thing. You might want to bump some old posts (if you haven't already).
 
I don't need any, but it may be a thread visability thing. You might want to bump some old posts (if you haven't already).

You might be right... I just hate bumping other threads.

As of the other day I stopped taking orders and sending out samples of the white to see if it fits. A few people "thought" they needed offset and it turns out that they didn't. I believe R-Type is not offset like some people thought.

So... Before anyone can order offset black molding from me send me an e-mail with your address so I can send you a sample of white. If it fits... THEN I WILL LET YOU ORDER. :)
 
Ok, this CAN STILL HAPPEN... However, I need everyone to check their samples and send payment so I can move forward. If it works for everyone that has replied back to me (and waiting for samples) we will be up to 11 machines. Ideally I need 15 to be comfortable with the project to move forward. So, if you don't have offset white molding already or haven't received a sample please do so ASAP. It is important that you have an actual sample to check to make sure it works. There is a very small need for this molding compared to True Flat and Offset White so if new tooling is needed for offset Black this project will need to be put on hold again.

Already ordered
Michael (non-member) - 60 feet (sample sent to verify it does indeed work)

Have Not Received Payment
Mike29 - 60 Feet (Sample Sent and verified work)
Kyle Dracup - 20 Feet
KidVidiot - 20 Feet (Sample not needed)
AlkalineJay - 60 Feet (Sample Sent)

Will Not work with current tooling
theminer49er (Sample sent and will not work)
 
Ok, this CAN STILL HAPPEN... However, I need everyone to check their samples and send payment so I can move forward. If it works for everyone that has replied back to me (and waiting for samples) we will be up to 11 machines. Ideally I need 15 to be comfortable with the project to move forward. So, if you don't have offset white molding already or haven't received a sample please do so ASAP. It is important that you have an actual sample to check to make sure it works. There is a very small need for this molding compared to True Flat and Offset White so if new tooling is needed for offset Black this project will need to be put on hold again.

Already ordered
Michael (non-member) - 60 feet (sample sent to verify it does indeed work)

Have Not Received Payment
Mike29 - 60 Feet (Sample Sent and verified work)
Kyle Dracup - 20 Feet
KidVidiot - 20 Feet (Sample not needed)
AlkalineJay - 60 Feet (Sample Sent)

Will Not work with current tooling
theminer49er (Sample sent and will not work)

It will go on DK and DKjr cabs, but it will not fit the offset used on the dedicated Vs cabs like the one in the attached pic... like R-type....the ones that actually had black T-molding
 

Attachments

  • DSC01063.jpg
    DSC01063.jpg
    91.3 KB · Views: 15
It will go on DK and DKjr cabs, but it will not fit the offset used on the dedicated Vs cabs like the one in the attached pic... like R-type....the ones that actually had black T-molding

Well crap, the three cabs I need it for are rtype, pc10 dedicated single monitor, and dedicated vs cab...
 
ok now im confused too. are you saying the measurements of the factory black offset are different from that of the factory white offset? and that audiomidiman's black offset is the same measurements as his white offset, therefore the black offset doesnt work with factory black offset cabs?
 
Ok I just tested an extra strip of true flat white offset t-molding I'd ordered from cq back in january on my dedicated vs. unisystem (the same kind as in theminer49er's post - white cabinet with black t-molding) and it fits perfectly on that machine.
 
Just so everyone knows... I have yet to order any black molding... I don't have a machine with black molding and only 3 or 4 of you have so far confirmed the white offset fits their dual vs. cabinets. 2-3 others say it does not. I've offered to send out more samples of offset white. If true-flat white fits on your machine (but you need black) you will most likely be SOL and need to purchase whatever is already out there in black.

So... I'll keep this project open 1-2 more weeks and if I still get very wishy washy answers I will most likely refund money and scrap the project again.

No complaints here... just trying to help out the community...
 
Just so everyone knows... I have yet to order any black molding... I don't have a machine with black molding and only 3 or 4 of you have so far confirmed the white offset fits their dual vs. cabinets. 2-3 others say it does not. I've offered to send out more samples of offset white. If true-flat white fits on your machine (but you need black) you will most likely be SOL and need to purchase whatever is already out there in black.

So... I'll keep this project open 1-2 more weeks and if I still get very wishy washy answers I will most likely refund money and scrap the project again.

No complaints here... just trying to help out the community...

just to clarify, it fits my regular dedicated vs cabinet, not dual vs.
 
if this will not fit the gray Vs. cabinet I will have to pass...If it will fit I am In!
 
Back
Top Bottom