Power Cord Replacement Question

gnrl01

New member

Donor 2012
Joined
May 22, 2012
Messages
109
Reaction score
1
Location
Panora, Iowa
My Galaga has a noise inverter and the power cord is completely hacked. Right now it has two brown wires. The new power cord has a black/white and green wire. Does the black and wire matter which side it goes on the inverter. I don't want to hook it up wrong and fry something. Here is a pic of my current setup. Thanks in advance...



noiseinverter.jpg


projectfront.jpg






These wires were hacked and twisted together to bypass the safety switch and tipos on what order they go in would be great also. I have two green wires and two yellow but the switch has 6 spades.

safetyswitch.jpg
 
OOPs both those wires are black arent they...so my eyes are shot lol any help would be awesome.
 
OOPs both those wires are black arent they...so my eyes are shot lol any help would be awesome.

If you want to hook up the new power cord like the old one, just look at and feel the old cord. One side will be ridged, this is the neutral or white. Looking at the pic you posted the Black on top,green in middle and white on bottom.
 
I actually was able to figure it out, thanks for the reply so I am positive now.
 
Back
Top Bottom