GuidoTorpedo
Well-known member
POSSIBLE PART OUT: 2 Williams Dot Matrix pinballs...
... unless someone wants to buy them whole:
Demo Man and Johnny Mnemonic, 900 each, complete. Both have bad/soft displays. Both are domestic machines. Both need to be gone through cosmetically and electronically.
Demo Man:
Playfield is nice, cabinet was drilled for lockbar in front and head decals are crinkling. Aside from what was mentioned above, it probably needs a U20 chip, as it shows a ground short error. The U20 on this is soldered to the board, so you will need to cut the chip out and solder a socket in, and place a new chip in. Prices for parts are as follows, domestic shipping included:
Complete boardset, including CPU as is non working, and Auxilliary 8 driver board (extra board in upper right corner used in this, TZ, etc.). Does not include display. $600. Boards are clean, no hacks, no acid damage.
CPU as is $175
-3 type driver board $175
Fliptronics board $80
DCS sound board w/ DM roms $125
Display driver $85
Auxillary 8 driver board $85
Transformer $100
Entropy 2 slot coin door with bill acceptor slot $60
Display panel with speakers, no display $45
translight $50
Gun handles from sides of cabinet , very little tarnish, great shape $80/pair
Playfield parts and playfield: I will sell parts or as a whole. The field is in good, unshopped condition. Plastics are for the most part decent. Email your requests for individual parts and I will quote you a price. Same goes for any cabinet parts unmentioned above.
Johnny Mnemonic: Playfield is nice, but dirty. Cabinet shows fade to orange mostly. The game boots and starts a game, but the hand has a bad motor/gearbox on it. I have a used working one uninstalled.
Boardset: WPC-Security CPU (used on games like Road Show, World Cup, Theater, etc.), -3 type driver board, DCS sound board, fliptronics, and DMD driver. I am keeping the good DMD driver and including one that needs repair. The CPU has an intermittent re-booting issue from either a loose chip or a cold solder joint. Whole set as stated for $500. Boards are clean, no acid damage, no hacks.
WPC-S CPU needing minor work, with security chip for JM: $175
Other individual board prices are the same as from Demo Man above.
Transformer and coin door are same as with Demo Man above.
Translight: $50
Generic black Williams DMD panel with speakers, no display $70
Same deal as Demo Man with the playfield. Will sell complete or part out, just email your requests, and I'll let you know prices.
Here is how I am handling this... I would rather sell the games complete, but have tried to do so recently with no success. I will wait until Friday to start ripping parts off of these in lieu of a possible buyer for the games complete. If you want them, let me know. Otherwise, on Friday, I start going crazy with my screwdriver. In the meantime, if you do want some parts, email your requests and I will email you back this weekend with prices, or to let you know if the game was sold.
Thanks!
-Mike
... unless someone wants to buy them whole:
Demo Man and Johnny Mnemonic, 900 each, complete. Both have bad/soft displays. Both are domestic machines. Both need to be gone through cosmetically and electronically.
Demo Man:
Playfield is nice, cabinet was drilled for lockbar in front and head decals are crinkling. Aside from what was mentioned above, it probably needs a U20 chip, as it shows a ground short error. The U20 on this is soldered to the board, so you will need to cut the chip out and solder a socket in, and place a new chip in. Prices for parts are as follows, domestic shipping included:
Complete boardset, including CPU as is non working, and Auxilliary 8 driver board (extra board in upper right corner used in this, TZ, etc.). Does not include display. $600. Boards are clean, no hacks, no acid damage.
CPU as is $175
-3 type driver board $175
Fliptronics board $80
DCS sound board w/ DM roms $125
Display driver $85
Auxillary 8 driver board $85
Transformer $100
Entropy 2 slot coin door with bill acceptor slot $60
Display panel with speakers, no display $45
translight $50
Gun handles from sides of cabinet , very little tarnish, great shape $80/pair
Playfield parts and playfield: I will sell parts or as a whole. The field is in good, unshopped condition. Plastics are for the most part decent. Email your requests for individual parts and I will quote you a price. Same goes for any cabinet parts unmentioned above.
Johnny Mnemonic: Playfield is nice, but dirty. Cabinet shows fade to orange mostly. The game boots and starts a game, but the hand has a bad motor/gearbox on it. I have a used working one uninstalled.
Boardset: WPC-Security CPU (used on games like Road Show, World Cup, Theater, etc.), -3 type driver board, DCS sound board, fliptronics, and DMD driver. I am keeping the good DMD driver and including one that needs repair. The CPU has an intermittent re-booting issue from either a loose chip or a cold solder joint. Whole set as stated for $500. Boards are clean, no acid damage, no hacks.
WPC-S CPU needing minor work, with security chip for JM: $175
Other individual board prices are the same as from Demo Man above.
Transformer and coin door are same as with Demo Man above.
Translight: $50
Generic black Williams DMD panel with speakers, no display $70
Same deal as Demo Man with the playfield. Will sell complete or part out, just email your requests, and I'll let you know prices.
Here is how I am handling this... I would rather sell the games complete, but have tried to do so recently with no success. I will wait until Friday to start ripping parts off of these in lieu of a possible buyer for the games complete. If you want them, let me know. Otherwise, on Friday, I start going crazy with my screwdriver. In the meantime, if you do want some parts, email your requests and I will email you back this weekend with prices, or to let you know if the game was sold.
Thanks!
-Mike