kspiff
Well-known member
Possible FS: most of my collection, lots of Atari, Houston, TX
***found the pics: http://www.arcadecrusade.com/gallery/v/gamerooms/kspiff ***
Selling most of my games due to lack of space and interest. Titles for sale include:
*Q*bert is not for sale anymore for now, may keep*
Q*bert w/ multi installed (nice original condition, repro CPO installed, original sideart and glass new front vinyl and repainted coin door, would prob include riptor rebuilt G07 chassis and repro front art, sound is a bit glitchy though, think it is the relevant chip on mainboard) w/ manual + schems, flyer, flyer key chain
---
Probably looking for about $500, which is pretty reasonable considering the condition and what is included.
Millipede w/ multi (multi not installed, working, 90% recapped monitor, new marquee, front art, CPO, trackball rebuilt w/ new rollers/ball, new molding, repainted coin door, has some swell around bottom inches but not very noticeable as I put a lot of work into restoring it) w/ manual + schems, flyer, flyer key chain
---
Looking for $300 on this with the multigame, it's pretty damn nice, but with that bit of swell towards the bottom I can't reasonably ask for more.
$250 without multigame.
Paperboy (working, 90% recapped monitor, new repro side art installed, repainted coin door, solid cabinet aside from slightly crooked hinged back door, refurbed controls w/ new grips, new front vinyl, includes essentially a full rebuild kit for controller as spares) w/ manual + schems, flyer, flyer key chain
---
Looking for probably $400 on this setup
. If you want a nice Paperboy I think you might be hard pressed to find one much better.
*Prob selling DK to my bro. But he doesn't want the Jr. and DK3 PCBs so would sell DK Jr. PCB w/ HSS for $150 shipped and DK3 w/ HSS for $125*
Donkey Kong w/ D2K + DK Jr. W/ HSS + DK3 w/ HSS (restored painted DK cabinet - might want to strip down and redo it with vinyl now that they make it, just IMO - w/ new repro everything, super clean and complete, working) w/ manuals, flyer, and flyer key chain
---
Ugh going to lose so much on this no matter what I ask. Would probably take $650 (with all the boards and everything). Not so much looking to split up at this time.
720 (OMG super mint restored, new vinyl, sideart, CPO, boombox overlay, and aerial exp sticker, only thing to do is a new monitor bezel and monitor chassis rebuild, and parts w/ flyback for that would be included, as well as rebuild kit for joystick should the recently rebuilt stick wear down again)
---
Probably looking for about $800. This thing is like new restored mint, only thing needed is a monitor rebuild to fix a color issue.
JAMMA cabinet (sort of like a candy after a lot of work, but think it was some gambling machine)
---
Not sure if selling this, need a new candy before I do... Anybody got one?
Road Blasters $250 (fully restored System 1 cab with pedal, nice melamine job on this one, like new repro System I sideart, recapped monitor (done about 3-4 yrs ago), refurbed and repainted control yoke, plywood replacement bottom piece, all other accents repainted. Great machine.) w/ full Sys I and RoadBlasters manual/schem sets, flyers, flyer keychain (think keychain has Pack Rat on it though), and probably a spare working daughterboard if I still have one in one piece.
Tempest project w/o PCB $200
---
Monitor works if you reinstall the poly cap I removed from HV section. No PCB, otherwise complete and should work w/ your board once monitor is straight.
Cab has few blemishes, but sideart is super clean and no real water damage I can see. You would have to strip, repaint, and install new CPO + rebuild spinner yourself. New CPO, marquee overlay included. If nobody buys this going to part it out.
PS yes I'll be keeping a couple games so no need to ask, can't see myself selling Assault or Star Wars, also hesitating on Super Punch-Out.
***found the pics: http://www.arcadecrusade.com/gallery/v/gamerooms/kspiff ***
Selling most of my games due to lack of space and interest. Titles for sale include:
*Q*bert is not for sale anymore for now, may keep*
Q*bert w/ multi installed (nice original condition, repro CPO installed, original sideart and glass new front vinyl and repainted coin door, would prob include riptor rebuilt G07 chassis and repro front art, sound is a bit glitchy though, think it is the relevant chip on mainboard) w/ manual + schems, flyer, flyer key chain
---
Probably looking for about $500, which is pretty reasonable considering the condition and what is included.
Millipede w/ multi (multi not installed, working, 90% recapped monitor, new marquee, front art, CPO, trackball rebuilt w/ new rollers/ball, new molding, repainted coin door, has some swell around bottom inches but not very noticeable as I put a lot of work into restoring it) w/ manual + schems, flyer, flyer key chain
---
Looking for $300 on this with the multigame, it's pretty damn nice, but with that bit of swell towards the bottom I can't reasonably ask for more.
$250 without multigame.
Paperboy (working, 90% recapped monitor, new repro side art installed, repainted coin door, solid cabinet aside from slightly crooked hinged back door, refurbed controls w/ new grips, new front vinyl, includes essentially a full rebuild kit for controller as spares) w/ manual + schems, flyer, flyer key chain
---
Looking for probably $400 on this setup
. If you want a nice Paperboy I think you might be hard pressed to find one much better.
*Prob selling DK to my bro. But he doesn't want the Jr. and DK3 PCBs so would sell DK Jr. PCB w/ HSS for $150 shipped and DK3 w/ HSS for $125*
Donkey Kong w/ D2K + DK Jr. W/ HSS + DK3 w/ HSS (restored painted DK cabinet - might want to strip down and redo it with vinyl now that they make it, just IMO - w/ new repro everything, super clean and complete, working) w/ manuals, flyer, and flyer key chain
---
Ugh going to lose so much on this no matter what I ask. Would probably take $650 (with all the boards and everything). Not so much looking to split up at this time.
720 (OMG super mint restored, new vinyl, sideart, CPO, boombox overlay, and aerial exp sticker, only thing to do is a new monitor bezel and monitor chassis rebuild, and parts w/ flyback for that would be included, as well as rebuild kit for joystick should the recently rebuilt stick wear down again)
---
Probably looking for about $800. This thing is like new restored mint, only thing needed is a monitor rebuild to fix a color issue.
JAMMA cabinet (sort of like a candy after a lot of work, but think it was some gambling machine)
---
Not sure if selling this, need a new candy before I do... Anybody got one?
Road Blasters $250 (fully restored System 1 cab with pedal, nice melamine job on this one, like new repro System I sideart, recapped monitor (done about 3-4 yrs ago), refurbed and repainted control yoke, plywood replacement bottom piece, all other accents repainted. Great machine.) w/ full Sys I and RoadBlasters manual/schem sets, flyers, flyer keychain (think keychain has Pack Rat on it though), and probably a spare working daughterboard if I still have one in one piece.
Tempest project w/o PCB $200
---
Monitor works if you reinstall the poly cap I removed from HV section. No PCB, otherwise complete and should work w/ your board once monitor is straight.
Cab has few blemishes, but sideart is super clean and no real water damage I can see. You would have to strip, repaint, and install new CPO + rebuild spinner yourself. New CPO, marquee overlay included. If nobody buys this going to part it out.
PS yes I'll be keeping a couple games so no need to ask, can't see myself selling Assault or Star Wars, also hesitating on Super Punch-Out.
Last edited:

