Possible donor TV for slim K7000.

Mitsurugi-w

Well-known member

Donor 2011
Joined
Jul 8, 2009
Messages
2,387
Reaction score
43
Location
New Bern, North Carolina
I was given a few TVs today by an employee that knows I can use the tubes potentially. The first tv was no good. CR-25 adaptor and a UA adaptor for my sencore.

The second TV however is an Emerson manufactured in 2002. It has a DVD and VCR built in. I couldn't find the tube number in the B+K setup chart but it uses socket 5 on my sencore which correlates to CR-31 on the B+K. Can anyone confirm the B+K setup?

Yoke readings:

Vert: 12.8
Horiz: 3.0

169rat5.jpg


28lq39z.jpg


28v65x5.jpg
 
A neat thing I found in some of the older vcr combo TVs is that the TV chassis is pretty basic, like an arcade chassis, and usually color composite raster, so if you need a 19" composite color raster monitor for a BW replacement, or for games like Dragons Layer, etc. these are pretty cool to grab and if anything save the chassis in one piece.

I had one I was scrapping, and based on what I found in side I chucked the VCR portion and kept the TV in one piece as a possible composite raster monitor, or later tube donor if I never need the chassis.

EDIT - Added to the list and made a note that the socket should be verified.
 
Last edited:
According to what I could find, the A48LRH93X substitutes to a type A48JLL90X which uses a CR-31 adapter on the B & K rejuvenators.

So it would appear that your A48LRH93X uses a CR-31 and has a 6.3 volt heater.

I have now written this tube number into my hardcopy B&K setup manual for future reference.
 
Back
Top Bottom