NEW Possible deal happening for Americoin Junkyard/Dozer parts

Shawn1976

Well-known member

Donor 10 years: 2016-2025
Joined
Apr 17, 2008
Messages
8,767
Reaction score
460
Location
Saint Augustine, Florida
Possible deal happening for Americoin Junkyard/Dozer parts

I might be in touch with someone with a small stock of Americoin Junkyard and Dozer parts and wanted to see if there would be anyone out there interested in some extra parts?
The list is not 100% yet but here is a list of the possible parts I'll be receiving based off of the part numbers.

List:
04-0011 drive nuts 10 pieces
01-2404 claw motor 2 pieces
02-0060 claw plunger 3 pieces
238-0004 pit switch 6 pieces.
05A0012 vehicle tread 4 pieces - Dozer - SOLD
09-0042 sleeve 8 pieces
01-1006 claw solenoid 2 pieces
Crane cables for machine 2 pieces
02-0070 actuator pin 5 pieces
06-0006 pc board 3 pieces
04-2003 pivot bolt 10 pieces
09-0040 plunger 5 pieces
02-0066 switch mount 4 pieces
Black button crane control 6 pieces
04-0006 switch nut 6 pieces
02-0058 collars 6 pieces
28B-0002 motor 5000RPM, 115volt 60 Hz 2 pieces - Dozer - SOLD

Anybody out there with an Americoin Dozer or Junkyard please chime in if your interested.
 
Last edited:
Apologies for the photos being a little blurry.
Will have updated pictures once I receive the parts.
Here are the two Dozer motors and the Dozer Treads
 

Attachments

  • IMG_2304.JPG
    IMG_2304.JPG
    130.6 KB · Views: 41
  • IMG_2305.JPG
    IMG_2305.JPG
    138.1 KB · Views: 29
  • IMG_2321.JPG
    IMG_2321.JPG
    106.4 KB · Views: 28
And the other above mentioned parts
 

Attachments

  • IMG_2309.jpg
    IMG_2309.jpg
    113.3 KB · Views: 25
  • IMG_2310.jpg
    IMG_2310.jpg
    117.7 KB · Views: 24
  • IMG_2306.JPG
    IMG_2306.JPG
    129 KB · Views: 28
  • IMG_2307.JPG
    IMG_2307.JPG
    140.1 KB · Views: 23
More Pictures
 

Attachments

  • IMG_2311.jpg
    IMG_2311.jpg
    131.1 KB · Views: 23
  • IMG_2312.JPG
    IMG_2312.JPG
    122.2 KB · Views: 24
  • IMG_2313.JPG
    IMG_2313.JPG
    97.6 KB · Views: 21
  • IMG_2314.jpg
    IMG_2314.jpg
    120.1 KB · Views: 28
And More Pictures
 

Attachments

  • IMG_2315.JPG
    IMG_2315.JPG
    108.8 KB · Views: 19
  • IMG_2316.JPG
    IMG_2316.JPG
    114.8 KB · Views: 18
  • IMG_2317.jpg
    IMG_2317.jpg
    134 KB · Views: 21
  • IMG_2318.jpg
    IMG_2318.jpg
    119.8 KB · Views: 15
And some more pictures.
 

Attachments

  • IMG_2319.jpg
    IMG_2319.jpg
    117.5 KB · Views: 15
  • IMG_2322.JPG
    IMG_2322.JPG
    169.5 KB · Views: 14
  • IMG_2324.jpg
    IMG_2324.jpg
    198.8 KB · Views: 14
  • IMG_2325.jpg
    IMG_2325.jpg
    198.8 KB · Views: 17
shawn that claw motor also works for the car return and i think can also be used for the clock mech. no drive belt for the crane in that hey ? :(
 
Unfortunately no.
But when I did get the parts the guy I purchased them from threw in 2 NOS joystick shafts.
:)

shawn that claw motor also works for the car return and i think can also be used for the clock mech. no drive belt for the crane in that hey ? :(
 
Back
Top Bottom