Popeye with Vs Unisystem questions

Sbeehive

Member
Joined
Sep 17, 2012
Messages
233
Reaction score
2
Location
Rhode Island
Hey all,

My recent Popeye pickup went pretty well. I remember hearing that its an easy conversion to a VS Unisystem and my interest is a bit higher now that I've gotten Popeye to work so well.
Now, I'm not willing to destroy my Popeye--- but I was wondering if its possible to run the Unisystem with the Popeye in the same machine. I know theres Nintendo Multiswitchers and the like- but I also know the voltages are probably different between boards.
The guy I bought it from had the whole thing wired through a Peter Chou PS- its all done well but its not stuff I want to mess with. It looks a lot more complicated than the original wiring setup.
Is there any way I can do this without drastically altering the PSU setup?

Thanks,

Sbeehive


Here is a pic of the wiring setup on day one (Camera is being charged right now):
http://i.imgur.com/r4B31.jpg
 
you could just mount a cage on the other side.
install the other harness then just swap harneses and the CP when you want to play the other game.

that chow suply will power both boardsets. and the conector for the power should be the same. just make sure you have the +5 and +12 in the molex from the power suply.

Peace
Buffett
 
Back
Top Bottom