FS Parts: Popeye kit

JulesWallet

Member
Joined
Aug 8, 2009
Messages
331
Reaction score
11
Location
Glendale, Arizona
Rating - 100%
9   0   0
I am selling off my Popeye kit. The pcb was working when tested in my old Popeye. The bezel is ok, Zorro's brother Xavier carved and X in it. Everything else with the bezel is good. The marque is in good condition. The control panel is missing the joystick and the buttons are wrong. It also has cigarette burns. The wiring looks complete.

$150 shipped

Will trade for Playchoice/Punch Out power supply, transformer and wiring harness.
 

Attachments

  • IMG_0097.jpg
    IMG_0097.jpg
    95.6 KB · Views: 94
  • IMG_0099.jpg
    IMG_0099.jpg
    93.4 KB · Views: 82
  • IMG_0101.jpg
    IMG_0101.jpg
    96.6 KB · Views: 92
  • IMG_0102.jpg
    IMG_0102.jpg
    98.1 KB · Views: 55
Last edited:
If I recall correctly:
popeye is only popeye
mario works for popeye and mario, even though the its not the same volt.
and DK will not work at all for popeye or mario
 
If I recall correctly:
popeye is only popeye
mario works for popeye and mario, even though the its not the same volt.
and DK will not work at all for popeye or mario

I have two DK power supplies, one in my DK and one in my Mario and they work fine. Same model pp-7a? Something like that. I can't really pull the cabs out right now and check. If I can use this PS for Popeye I am interested.
 
if your PS ends up being compatible, John's a good guy, I picked up his dedicated popeye cab a while back. If I wasnt going to do a dedicated herbie at the Olympics/ second DK cab, I'd snag this for a second popeye. Hope you get it, it's a great ninty game :)
 
Your right, Popeye PS is unique. I replaced mine with an Aradeshops DK switcher conversion (had to solder in the other header pins on the conversion board) and ran the other voltages into the plug and can now run any ninty boards in my cab.
 
I am selling off my Popeye kit. The pcb was working when tested in my old Popeye. The bezel is ok, Zorro's brother Xavier carved and X in it. Everything else with the bezel is good. The marque is in good condition. The control panel is missing the joystick and the buttons are wrong. It also has cigarette burns. The wiring looks complete.

$150 shipped

Will trade for Playchoice/Punch Out power supply, transformer and wiring harness.

Damn Xavier claims another bezel. Damn you, Xavier...Damn you!
 
Back
Top Bottom