Popeye keeps blowing monitor fuse. HELP

Les Manley

Well-known member
Joined
Jun 29, 2009
Messages
3,411
Reaction score
636
Location
Saint Paul, Minnesota
I have a Popeye that was working and now keep blowing monitor fuse 0.3A according to the manual. It is on the main video monitor PCB. All other fuses are good everywhere, including the other fuse 4A on that same PCB. When I turn it on, I do not get power to anything I believe. Has anyone seen this before or know what the probable issue is? Any help would be greatly appreciated.
 
1) I hope the monitor is plugged into the power supply at the bottom of the cab and not the wall. The monitor is a 100v monitor. Check the outlet at the bottom of the cab to make sure you have it plugged into an outlet that is putting out 100v.

2) This should be moved to the monitor help section.

3) I assume you have an upright Popeye, and not a cocktail? They used different monitors, which we need to know before getting more in-depth...
 
1) I hope the monitor is plugged into the power supply at the bottom of the cab and not the wall. The monitor is a 100v monitor. Check the outlet at the bottom of the cab to make sure you have it plugged into an outlet that is putting out 100v.

2) This should be moved to the monitor help section.

3) I assume you have an upright Popeye, and not a cocktail? They used different monitors, which we need to know before getting more in-depth...

Yes, it is plugged into the bottom of the cab. It is an upright as well. I posted it here because I wasn't completely sure it was a monitor issue, thought maybe it could be power supply or something else.
 
Back
Top Bottom