Poor green focus on K4800 series 13" monitor

Brooklyn

Member
Joined
May 21, 2006
Messages
212
Reaction score
3
Location
Morgan Hill, California
Hi, I just recapped and replaced the flyback on my 13" WG 4800 monitor. Everything now works great however the green color doesn't focus well, while the red and blue focus just fine.

I tried various adjustments of the drive/cutoff controls but couldn't adjust it away. Is there anything else to try, or should I borrow a CRT restore/rejuv and refresh the green?

Thanks!
 
How do the whites look? If they are not pure white, then your color balance is still off, and still needs to be adjusted. Best way to start, adjust all color pots to the same position, I usually start from 1/3 to 1/2 way point(starting counterclockwise), then slowly adjust from there.
 
Back
Top Bottom