Police Trainer issue

krankcolc

New member
Joined
Jan 24, 2010
Messages
184
Reaction score
0
Location
Cincinnati, Ohio
So I have a Police Trainer that was moved to a different house. Upon arrival, I plug it in and the guns are acting up. When you fire, the screen flashes but you can't hit anything on the screen with either gun. I've reseated all the connections and thats not the problem. I've tried different guns with the same effect. I checked all the other basic things I know to look for. What am I not seeing? It seems to be a simple thing I'm overlooking as everything else works fine. Thanks for any input you can offer
 
did it work prior to moving? if so, have you tried to recalibrate the guns?
 
Did you try adjusting the brightness on the monitor? Try turning it up all the way and see what happens.
 
The lighting is different. BUT I played with it again today and really just did all the same things and it somehow decided it would work. We had to adjust the lighting in the room many times and also the flash settings. We also had to take the tinted glass off. It no longer works with the glass on. Some plexi will take care of that. Thanks for all the suggestions. I didn't know they were that sensitive.
 
You should also check the 5 volts going to your game board and reseat the connectors. Sometimes they can get knocked loose when moving. I don't know if this was covered under the basic things you checked.
 
I did that first. It didn't seem like anything was wrong with it, that's why I posted up here. I was stymied. It's running fine now. It almost seems like it had to adjust to it's new environment which doesn't really make sense to me
 
Back
Top Bottom