corkgiants Member VAPS Joined Aug 26, 2011 Messages 33 Reaction score 4 Location Leesburg, Virginia Oct 12, 2011 #1 Does anyone know the answer please. I am trying to get a G07 to work with it. Jim
Superully Active member VAPS Joined Apr 22, 2008 Messages 1,749 Reaction score 11 Location Lauda, Baden-Wuerttemberg, Germany Oct 12, 2011 #2 negative! there's an extra plug for the go7s attached to the wiring harness
paul400 Well-known member VAPS Joined Nov 8, 2010 Messages 2,416 Reaction score 219 Location Hixson, Tennessee Oct 13, 2011 #3 Pole is composit neg sync. One wire,its has to be looped to the negitive pins on the go7
paul400 Well-known member VAPS Joined Nov 8, 2010 Messages 2,416 Reaction score 219 Location Hixson, Tennessee Oct 13, 2011 #4 Connect pin 2 and 3 of the three pin connctor for composite neg sync on the go7
KenLayton In Memoriam Joined Dec 14, 2003 Messages 20,220 Reaction score 712 Location Olympia, Washington Oct 13, 2011 #5 Pole Position cabinets have two monitor wiring harnesses: one for Matsushita monitors and one for normal monitors. Depending on what monitor was originally in there, the harness for the other one is usually wire tied back out of the way.
Pole Position cabinets have two monitor wiring harnesses: one for Matsushita monitors and one for normal monitors. Depending on what monitor was originally in there, the harness for the other one is usually wire tied back out of the way.
OP OP corkgiants Member VAPS Joined Aug 26, 2011 Messages 33 Reaction score 4 Location Leesburg, Virginia Oct 13, 2011 #6 thanks everyone I appreciate your assistance. I'll give it a try. Jim