Pole Position rom 8

If it is like most games, if you get an error regarding your roms, you need to get a new eprom programmed and replace the one in the boardset.
 
Assuming you have an Atari PCB, that's the ROM at 3D. Remove it, scrape the legs clean with a razor blade, pop it in and give it another try. If that does not work, try a new ROM as suggested.
 
Assuming you have an Atari PCB, that's the ROM at 3D. Remove it, scrape the legs clean with a razor blade, pop it in and give it another try. If that does not work, try a new ROM as suggested.

If it is not the rom then look at the chips going to from that rom. A rom error is not always the rom.
 
Back
Top Bottom