Pole Position Monitor Issue

CMGTGuy

Member
Joined
Oct 12, 2008
Messages
717
Reaction score
0
Location
Mooresville, North Carolina
Picked up a Pole Position II a while back with a bad board and sent it off for repairs. Recently received it back and it works great. However, I'm now aware of some monitor issues that I didn't know about before. When it starts up the screen rolls. After about a ten (10) minute warm up it's fine (Pictures Attached). Is this a cap/fly issue or a PS issue? Any and all help is greatly appreciated.
 

Attachments

  • 565678_10100873807115553_560928825_n.jpg
    565678_10100873807115553_560928825_n.jpg
    85.4 KB · Views: 17
  • 565935_10100873807489803_388564754_n.jpg
    565935_10100873807489803_388564754_n.jpg
    38.7 KB · Views: 16
Capkit will probably fix it. You've got a cap that's changing value after everything warms up to where it's supposed to be, do a capkit and it should fix you up.
 
I have tried the hold multiple times. However, when you turn the machine off and back on a few hours later you get the same thing. Seems a cap kit is in order.
 
Back
Top Bottom