Pole Position board repair needed

Smart Bomb

Well-known member

Donor 2014, 2024
Joined
Apr 25, 2014
Messages
3,425
Reaction score
494
Location
Kenner, Louisiana
I have a pole position board that was working but lacked steering. It is NOT the steering opti board thats the issue.

In trying to trouble shoot the steering issue the game no longer boots up or if it does its gibberish on screen or a ram/rom error...ive reseated chips and have taken it as far as i can take it with my limited pcb repair knowledge...im done trying to fix it..so who is up for a pp repair? Pm me please.

Its has been bullet proofed and volatges are dead on...the board is clean and solid...it just all of the sudden stopped giving a playable screen and no longer the car crash boot up sound on start up.
 
have you bypassed the edge connector on the 2 pcb boards?do you have 5 volts at the steering board (red & black 2 and 3)?
 
have you bypassed the edge connector on the 2 pcb boards?do you have 5 volts at the steering board (red & black 2 and 3)?

Yes..that has all been addressed..ive made more than one thread on the problems..im at a dead end..last resort is to send it off for repair.
 
Ian fixes those pole position pcbs, so i would shoot him a pm.
 
Back
Top Bottom