QbertWPC
New member
I have a pole position 2 with a Ram 6 error displayed.
The first thing I did was swap the ram in that position with one next to it, no change. I did some reading that pointed to power supply problems.
I installed a switcher on the 5v line and did all the test point mods. I am getting 5.1v at IC legs on both boards.
Now what?
The first thing I did was swap the ram in that position with one next to it, no change. I did some reading that pointed to power supply problems.
I installed a switcher on the 5v line and did all the test point mods. I am getting 5.1v at IC legs on both boards.
Now what?