toyzngames1
New member
Pole 2 that has a G07 in it. A new fly back was put in. Monitor has been recapped as well as both power supplies. One other issue is that I can't get the voltage below 5.28 on the graphics side. Tried a new pot but it won't go lower. Installed a new Big Blue cap. Boards were rebuilt. I also put a new main connector to the graphics connector. It looks like all of the original grounds are in place. Also tried a K7000 that had been recapped in it, still the hum bar. It really does not hum, just the dam scrolling dark bar will not go away. I'm about ready to take an ax to it and then set it on fire but I don't own it.