Pole Position 1 PCB set

RPO_Z06

New member
Joined
Jul 7, 2009
Messages
338
Reaction score
2
Location
norman, Oklahoma
Rating - 100%
6   0   0
I have a set of PP1 boards that I used for a short time that had some video issues, they would work one time and not the next, I replaced the edge connector on the CPU with a Bob Roberts edge when I was using them, I also stole the Z80's and the interconnect off them recently for a set of PPII boards I put together so those are missing but otherwise complete boards.

$35.00 + shipping.
 
Back
Top Bottom