Point Blank 2 - wiring questions and schematic

moloch

Member
Joined
Jul 13, 2008
Messages
117
Reaction score
0
Location
Tacoma, Washington
I cannot find a schematic for Point Blank 2. I found one for Point Blank, but there are some differences between them and things are labeled differently. Examples - J102 is Jamma on my board and listed as J101 on the schematic I found, the extra pcb I have has a lot of labeled areas that are not listed J105, J107, J108, FL1 and J106.

Specifically I have a couple of Point Blank 2 game boards and one of them comes with the "Namco V147 EMI PCB" and a ton of wiring. I believe it was cut out of a working cabinet.

I have tested the board by simply hooking it up to a Jamma cabinet, but I want to actually play it and need to know how to wire this up.

I can include photos if that would help - let me know.
 
That manual's schematic is the same that I found in Point Blank 1.

Thanks for the link about the Happ guns. I was hoping to use them. I do not have any Namco guns, but may try and pick some up.
 
Back
Top Bottom