Playchoice game changing

delayed

Member
Joined
Jan 21, 2011
Messages
688
Reaction score
19
Location
Tennessee
Are there any other pages that show what PC10 carts can be changed to different games with simple eprom burning. And/Or a page showing what pads need to soldered to change EPROMs.

Also can carts with mask ROMs be used or do they have to be carts with only EPROMs?


And example would be,
PCH1-01-ROM-F can be "X" games.
PCH1-01-ROM can be "X" games.
PCH1-01-ROM-G can be "X" games.
PCH1-02-ROM-B can be "X" games.
etc.


I know of:
http://www.panthersplace.com/pc10/pc10allgamechips.htm
http://playchoice.riemen.net/eproms.html
 
Last edited:
Are there any other pages that show what PC10 carts can be changed to different games with simple eprom burning. And/Or a page showing what pads need to soldered to change EPROMs.

Also can carts with mask ROMs be used or do they have to be carts with only EPROMs?

Mask ROMs can only be used with other mask ROMs. You have to alter the socket to make it compatible with EPROMs and vice versa

And example would be,
PCH1-01-ROM-F can be "X" games.
PCH1-01-ROM can be "X" games.
PCH1-01-ROM-G can be "X" games.
PCH1-02-ROM-B can be "X" games.
etc.

There is much more information out there on programming repro carts for the NES. For instance, see this: http://www.callanbrown.com/index.ph...rial&catid=36:home-console-projects&Itemid=61

Also, for what games can be played on what cart, see this: http://bootgod.dyndns.org:7777/

You have to keep the mirroring in mind as well, as a horizontally scrolling game is usually not compatible with a vertically scrolling game without altering the board. Also, some boards will run multiple different boards. For instance, A TLROM game will run a TSROM game and a TKROM (but no battery support unless you solder that in.)

This should give you a good start!
 
Back
Top Bottom