Playchoice CP wiring help

SavePointVG

Member
Joined
May 31, 2012
Messages
370
Reaction score
1
Location
North Carolina
Hey guys,
Got a hold of antoher pc10 conversion into a pac cabinet. everything works well but the reset button and I cant seem to figure why none of the buttons im trying out or why im not getting anything trough the wires at all.. does this come from player 1 or player 2 harnes, any idea of the wire colors? thanks guys
 
I've seen the PAC to VS. conversion, but haven't heard of the playchoice kit for a PAC cab. Do you have any pics?
 
didnt wanna pull it all the way out but inside there is a g07 chassis and an original pac monitor with slight burn. picture isnice and birght though, could use some new t molding

8Zc1T.jpg

KInKu.jpg

MilTw.jpg
 
Whoa, that's a new one for me as well. I fixed up one of the Pac to Vs. conversions, but have never seen the Pac to PC-10 conversion. To reset, try hitting Channel Select and Enter (or Game Select and Start) at the same time.
 
Looks like someone hacked the Vs. Conversion to put a Playchoice in it.

In the last pic there is a disconnected harness, have you tried plugging that in?
 
Looks like someone hacked the Vs. Conversion to put a Playchoice in it.

In the last pic there is a disconnected harness, have you tried plugging that in?

haha yes 2600, i just had the cp out so i could fiddle with the reset buttons
 
Hey guys,
Got a hold of antoher pc10 conversion into a pac cabinet. everything works well but the reset button and I cant seem to figure why none of the buttons im trying out or why im not getting anything trough the wires at all.. does this come from player 1 or player 2 harnes, any idea of the wire colors? thanks guys

Push the channel select and enter buttons simultaneously, and it should reset.
 
Back
Top Bottom