Playchoice 10 top monitor

Beargirls9

Member
Joined
Feb 3, 2014
Messages
91
Reaction score
2
Location
Turnersville, New Jersey
Ok so my monitor was all zig zags but after some time it seemed to warm up and be ok. Now it doesn't get normal at all and is all zig zags again. Attempted to fix with the pots but didn't seem to help. You can see the screen behind the zags.

Suggestions please 😁
 

Attachments

  • CCA15108-669F-48B1-A301-01D0E7333BE1.jpg
    CCA15108-669F-48B1-A301-01D0E7333BE1.jpg
    545.8 KB · Views: 11
Last edited:
Sounds like a horizontal hold issue, that pot is towards the middle of the chassis behind the fly back. Post a pic of the issue to confirm.
 
Yep. Looks like h-hold to me as well. Maybe there is cold solder on the pot or it's broken if you've tried adjusting it. Maybe your video input header/connector needs looked at as well.
 
You've lost horizontal sync and need to adjust the horizontal hold. Which monitor chassis is this, Sanyo, sharp?
 
Back
Top Bottom