Playchoice 10 (single monitor) HELP!!

bearbahamut

New member
Joined
Apr 27, 2010
Messages
4
Reaction score
0
Location
Florida
I just got my first PC10 !!! I plugged it in the for the first time and it worked perfectly. After being on for two days of it stopped working. You can here it turn on but all that happens it the screen is slightly green and has horizontal thin white lines. No sound. No responce of any kind. I have checked everything I could think of and most everything looks good and clean, except the power supply looks old and very rusty. Could this be the problem?
 
I had a simular problem it was that a game cart was bad and it was locking up the main game board take and put one cart on at a time and see if thats your problem if your cart is bad your main board shouldn't work at least thats what mine did and always cap the monitor and sound amp. I always recap all of mine when i get a nintendo game of any kind the sanyo monitors have a great picture after a cap job.:)
 
did'nt work

I took every game cart out one at a time and turned it on with no change. Also cleaned all the plugs and connectors with "Deoxit". Some bad ass electrical cleaner that i've used for awhile now... No prevail.... I am still looking at the power supply and wondering if that could be the problem. It looks kinda nasty.

Attached are some photos of the screen and the machine it self.
 

Attachments

  • GetAttachment.jpg
    GetAttachment.jpg
    28.9 KB · Views: 34
  • pc10.jpg
    pc10.jpg
    42.7 KB · Views: 24
Last edited:
Back
Top Bottom