Playchoice 10 - Lower monitor blurry

Sorry to bring back this old thread, BUT side note question - Are you saying this Chassis (Sanyo 20 Z2aw) uses a CR25 neck/tube pinout ? Anyone, please confirm, and thank you
I'm sure it's the same as the EZV. I don't have a CR-25 adapter for my BK 467.

they're honestly almost entirely identical that I'm aware of, you could add that red power wire to an EZV to add the inverter. there's 1 cap different on the amplifier.

this is based on my own experiences. if any of this information is wrong let me know.
 
I'm sure it's the same as the EZV. I don't have a CR-25 adapter for my BK 467.

they're honestly almost entirely identical that I'm aware of, you could add that red power wire to an EZV to add the inverter. there's 1 cap different on the amplifier.

this is based on my own experiences. if any of this information is wrong let me know.
Ok, so the EZ's I know use a CR23 (normal common fat neck). So I am thinking this OP was wrong on the CR-25 statement ? Or they are indeed different ?
 
Back
Top Bottom