Playchoice 10 Dual PCB start screen

dyno

Well-known member
Joined
Apr 11, 2009
Messages
1,644
Reaction score
81
Location
Lower Mainland, Britsh Columbia
Just received a Playchoice 10 dual pcb today. It was missing the bios chip but I was able to get one. I currently have no cartridges for the board. What should the screens show on power up with no cartridges plugged in? Currently the top monitor is showing a blank screen with the timer in the bottom right corner and the bottom screen just a blank screen with no graphics. Going to add a picture shortly of what I am getting at power up. Thanks
 
Unfortunately I don't have one yet . Looking to either pick one up or buy the nes link adapter so I can use my NES games on it. Tried to upload the picture I took but it says the files to big to upload .
 

Attachments

  • IMG_8800.jpeg
    IMG_8800.jpeg
    839.3 KB · Views: 19
Last edited:
Unfortunately I don't have one yet . Looking to either pick one up or buy the nes link adapter so I can use my NES games on it. Tried to upload the picture I took but it says the files to big to upload .
Screenshot the picture, crop it and upload that.
 
Back
Top Bottom